Philips TL/10R series of ultraviolet lamps is reflective layer of UV-A fluorescent lamps, it belongs to the R-type reflector lamps Department, in terms of mechanical, electrical, and working conditions can be interchangeable with other light. TL/10 series launch ultraviolet UV-A band. Range of 350nm-400nm, the peak wavelength of 365nm. Which UV-B/UV-A ratio less than 0.1% (UV-B: 280nm-315nm). Type R (reflection type) 200 degree internal reflector. The internal reflective layer to improve the efficiency of the light, and the more frequent situation is particularly suitable for the radiation distance and light layout. To use TL/10 series, lamp mounting density can be improved (the center of light among the best distance of 30mm), which makes the radiation intensity increases, the radiation efficiency. 

 PL-S lamp phase formed by the two 10mm diameter fluorescent tubes. The lamp is equipped with particularly improved starter, able to provide instant start, also equipped with a capacitor, lamp holder and two-pin lamp feet of the connection phase. With other PL-S lamp, lamp holder, with their Universal ballast supporting. 

 Purposes: groups of plastic, UV glue, ink curing, cold light proofing, photochemical effects, insect lure. 

 Note: 
 A. When using the UV lamp must comply with the guidelines and safety norms. 
 Two. When to replace the lights on the existing equipment must follow the manufacturer's recommended exposure time to be adjusted accordingly.